Agilent Technologies E5071C ENA User Manual

Chapter 4 89
Troubleshooting
Performance test failure troubleshooting
4. Troubleshooting
NOTE When Crosstalk, System dynamic range or Uncorrected system performance test fails,
check first whether the connections of the RF semi-rigid cables between the suspicious
assembly and others are tight or loose. Also check for possible disconnection (impairment)
of the cables and connectors.
Table 4-8 Performance test failure troubleshooting information (Up to 8.5 GHz
Options)
First failed test Probable faulty board assembly or parts
OCXO BAS SYN
-SRC
SYN
-LCL
VNR RCV
-1
RCV
-2
RCV
-3
RCV
-4
T2
-SW
CBL
AUX Input ###
Frequency Accuracy
(Standard)
# ### ## #
Frequency Accuracy (1E5) # # ### ## #
RF Output Level Accuracy
& Flatness
## ### #
RF Output Level Linearity ## ### #
Trace Noise (S11) ## ## # ### #
Trace Noise (S22) ## ## # ### #
Trace Noise (S33) ## ## # ### #
Trace Noise (S44) ## ## # ### #
Trace Noise (S21, S12) ## ## # ### ### #
Trace Noise (S43, S34) ## ## # ### ### #
Crosstalk (S21, S12) # # # ## ## ### ###
Crosstalk (S32) # # # ## ## ### ###
Crosstalk (S43) # # # ## ## ### ###
Crosstalk (S14) # # # ## ## ### ###
System Dynamic Range
(S21)
## ## # ### #
System Dynamic Range
(S32)
## ## # ### #
System Dynamic Range
(S43)
## ## # ### #
System Dynamic Range
(S14, S12)
## ## # ### #
Noise Floor Port-1 # ###
Noise Floor Port-2 # ###
Noise Floor Port-3 # ###
Noise Floor Port-4 # ###

Agilent Technologies E5071C ENA Specifications

General

Brand	Agilent Technologies
Model	E5071C ENA
Category	Network Accessory
Language	English