Subsystem Command Reference 6
N9310A User’s Guide 123
AM Depth
:AM:DEPTh <val>
:AM:DEPTh?
This command sets the amplitude modulation depth.
The query returns the current AM depth.
AM Rate
:AM:RATE <val> <unit>
:AM:RATE?
This command sets the frequency of the internal AM source.
The query returns the current frequency of the internal AM
source.
Range 0 to 100
Minimum increment 0.1
*RST value 0.0 %
Returned data <val>
Front panel access AM > AM Depth
Range 20 Hz to 80 kHz
Minimum increment 0.1 Hz
*RST value 1.0000 kHz
Returned data format <val> <unit>
Front panel access AM > AM Rate
To Next Page
Loading...
