Overview 1
N9310A User’s Guide 11
Front and rear panel symbols
The CE mark: a registered trademark of the European Community.
The CSA mark: a registered trademark of the Canadian Standards
Association International.
The C-Tick Mark: a trademark registered to the Australian
Communication Media Authority. It indicates compliance with all
Australian EMC regulatory information.
marks the “on” position of the power line switch.
marks the “standby” position of the power line switch.
indicates that the instrument requires AC power input.
shows that this is an Industrial Scientific and Medical Group 1 Class
A product. (CISPR 11, Clause 4)
The instruction manual symbol: indicates that the user must refer to spe-
cific instructions in the manual.
ISM1-A
N10149
C
US
The signal generator has the following symbols. Before operation,
familiarize yourself with each marking and its meaning.
ICES/NMB-001
The ISM device complies with Canadian Interference- Causing
Equipment Standard- 001.
Cet appareil ISM est conforme à la norme NMB- 001 du Canada.
To Next Page
Loading...
