Subsystem Command Reference 6
N9310A User’s Guide 105
Frequency Subsystem
The frequency subsystem controls the settings and
parameters associated with frequency.
Continuous Wave (CW) Output Frequency
:FREQuency:CW <val> <unit>
:FREQuency:CW?
This command sets the frequency of a CW signal.
The query returns the current frequency of a CW signal.
Range 9 kHz to 3 GHz
Valid unit GHz, MHz, kHz
Minimum increment 0.1 Hz
*RST value 3.000 000 0000 GHz
Returned data format <val> <unit>
Front panel access
Frequency
To Next Page
Loading...
