Subsystem Command Reference 6
N9310A User’s Guide 139
LF Output Subsystem
The low frequency (LF) subsystem controls the settings and
parameters of an LF output signal.
LF Output State
:LFOutput:STATe ON|OFF|1|0
:LFOutput:STATe?
This command enables or disables the LF signal output.
The query returns the current state of LF output signal.
Range ON(1), OFF(0)
*RST value OFF
Returned data 1, 0
Front panel access LF Out > LF Out On/Off
To Next Page
Loading...
