Getting Started 2
N9310A User’s Guide 25
Remote Control
The configuration of setting up a remote control for your
N9310A is simply. You only need find a USB cable to
connects your N9310A with a PC which has installed Agilent
IO Libraries Suite.
If you need the remote control more flexible, you can also
build up your own program by using Agilent VTL (Visa
Transition Library and the SCPI commands.
For more information about N9310A SCPI commands and
programming examples, refer to “Subsystem Command
Reference” on page 101.
If you are new to instrument programming, please refer to
Chapter 5, “Programming Fundamentals,” starting on page 85.
To Next Page
Loading...
