Agilent N9310A RF Signal Generator
User’s Guide
29
3
Using Functions
Commonly used Front-panel Elements 30
Generating a CW Signal 32
Generating a Step Swept Signal 33
Generating a Modulated Signal 40
Generating an LF Output 48
Save, Recall and Delete an Instrument State 49
This chapter contains procedures that show you how to use
some of the major functions of your signal generator includ-
ing setting frequency and power levels, setting up modula-
tions, creating RF and LF sweeps, saving and recalling
instrument states, and enabling options.
To Next Page
Loading...
