140 N9310A User’s Guide
6 Subsystem Command Reference
LF Output Frequency
:LFOutput:FREQuency <val> <unit>
:LFOutput:FREQuency?
This command sets the LF output frequency.
The query returns the current LF signal frequency.
LF Output Amplitude
:LFOutput:AMPLitude <val> <unit>
:LFOutput:AMPLitude?
This command sets the LF output amplitude.
The query returns the current LF output amplitude.
Range 20 Hz to 80 kHz
Valid unit kHz, Hz
Resolution 0.1 Hz
*RST value 1.0000 kHz
Returned data format <val> <unit>
Front panel access LF Out > LF Out Freq
Range 0 to 3 V
Valid unit V, mV
Resolution 1 mV
*RST value 500 mV
Returned data format <val> <unit>
Front panel access LF Out > LF Out Ampl
To Next Page
Loading...
