50 N9310A User’s Guide
3Using Functions
How to edit a file name Assume you need to name an
instrument state as “sample”, refer to following operations:
1 Pressing Save softkey enables editing file name and the
signal generator automatically types an “a” as the first letter.
2 Rotating the knob until the first letter changes to “s”.
3 Press Next softkey to confirm the first letter and the signal
generator automatically types an “a” as the second letter.
4 Repeat step 2 and step 3, until editing the file name
“sample” completes.
5 Pressing Save now confirms the file name and saves the
instrument state named as “sample.cfg” immediately in the
local memory.
Saving an instrument state to an external USB memory stick
Refer to the following steps to save an instrument state into
a USB memory stick:
1 Pressing Catalog
> USB sets the file catalog to USB.
2 Pressing Save softkey enables editing file name for the
instrument state you are going to save.
3 Edit the file name by rotating the knob and pressing Next
softkey for entering next letter.
4 Press Save now softkey to confirm the file name and save the
instrument state into the external USB memory stick
immediately.
To Next Page
Loading...
Need help?
General
