Only the selected channel signals are output from the MASTER OUT jacks or the OPTICAL OUT jacks. You
can select multiple channels, or select TRACK MIX channels and THRU MIX channels simultaneously.
➸
NOTE :
Since the
[RECORD SELECT]
keys are used to select channels for the Solo function, you cannot
change the tracks’ record waiting mode.
✐
TIP :
If you set all TRACK MIX channels to solo, you can mix down while using the
[RECORD SELECT]
keys to turn the channels on and off in real-time.
4. Press the [SOLO] key to cancel the Solo function.
The [SOLO] key LED turns off and the Solo function is cancelled.
✐
TIP :
The DPS12 memorizes the solo channels you select using the
[RECORD SELECT]
keys during the
Solo operation and retains them until the power to the unit is turned off. When you turn on the Solo
function, the same channels are automatically selected.
To Next Page
Loading...
Need help?
General
