83
Chapter 8: Edit technique
• If the number of TO tracks is smaller than the number of FROM tracks, the edit command will be executed for
the number of TO tracks in the order of the FROM track number.
Track 1
Track 2
Track 3
Track 4
Track 5
Track 6
Track 7
Track 8
FROM track
Track 1
Track 2
Track 3
Track 4
Track 5
Track 6
Track 7
Track 8
TO track
• If the number of TO tracks is larger than the number of FROM tracks, the edit command will be executed for
the number of FROM tracks in the order of the TO track number.
Track 1
Track 2
Track 3
Track 4
Track 5
Track 6
Track 7
Track 8
FROM track
Track 1
Track 2
Track 3
Track 4
Track 5
Track 6
Track 7
Track 8
TO track
COPY INSERT
This command enables you to copy data between the IN and OUT points and insert it after the NOW point. The
copy source data between the IN and OUT point will remain intact, and the existing data in the destination after
the NOW point will move forward in time.
FROM track
TO track
IN point OUT point
NOW point
IN point OUT point
NOW point
The data moves
forward.
COPY INSERT
➸
NOTE :
You may select multiple tracks as FROM tracks and TO tracks respectively. Refer to the NOTE of
“COPY PASTE” on page 82 for more information.
✐
TIP :
You may repeatedly insert the copied data after the NOW point, if necessary. Move the cursor to the
Repeat times:
field and turn the
[JOG]
dial to specify the number of repeat operations.
To Next Page
Loading...
