Akai DPS12 - Xover Flanger (G); Pan Flanger (G)

130
Chapter 13: Using the effects
Parameter Setting range Function
1 Rate 0.1Hz – 10.0Hz Adjusts the speed of LFO.
2 Depth 0 – 127 Adjusts the depth of LFO.
3 Fdback 0 – 127 Adjusts the feedback amount.
4 FB Inv ON/OFF Inverses the phase of feedback signals when turned on.
5 Width 0 – 127 Adjusts the width and spread of the stereo image.
XOVER FLANGER (G)
This is a variation of the STEREO FLANGER.
4
1
3
B
5
LFO
LFO
inverter
Delay
Delay
Width
Fdback
inverter
inverter
Parameter Setting range Function
1 Rate 0.1Hz – 10.0Hz Adjusts the speed of LFO.
2 Depth 0 – 127 Adjusts the depth of LFO.
3 Fdback 0 – 127 Adjusts the feedback amount.
4 FB Inv ON/OFF Inverses the phase of feedback signals when turned on.
5 Width 0 – 127 Adjusts the width and spread of the stereo image.
PAN FLANGER (G)
This effect adds an auto panning effect to the mono flanger.
4
1
3
B
5
LFO
inverter
Delay
L
R
Fdback
autopan
Parameter Setting range Function
1 Rate 0.1Hz – 10.0Hz Adjusts the speed of LFO.
2 Depth 0 – 127 Adjusts the depth of LFO.
3 Fdback 0 – 127 Adjusts the feedback amount.
4 FB Inv ON/OFF Inverses the phase of feedback signals when turned on.
5 Width 0 – 127 Adjusts the panning width.