57
Chapter 5: Assigning Input Signals and Virtual Tracks
3. To name a virtual track, move the cursor to the character field of the virtual track you wish to name,
then press the [NUMBER/NAME] key.
An underline appears at the top of the character field in which you can enter a name.
4. Use the [JOG] dial or the keys on the top panel to enter a name for this virtual track.
Refer to page 18, 19 for information on entering characters.
After entering characters, press the [NUMBER/NAME] key to confirm the name.
➸
NOTES :
• When the DPS12 is set to default, virtual tracks 1–12 are assigned to physical tracks 1–12.
• You cannot assign a single virtual track to multiple physical tracks. For example, if virtual track 1 has
already been assigned to physical track 1, you cannot assign virtual track 1 to another physical track. If you
wish to assign virtual track 1 to another physical track, first assign another virtual track to physical track 1.
TRACK ERASE function
You may erase the contents of a whole track selected.
1. While the ASSIGN VIRTUAL TRACK screen is displayed, move the cursor to the virtual track you want
to erase and press the
ERASE
[F6] key.
The following window appears.
2. Press the
DO IT
[F5] key.
The whole contents of the selected track will be erased. Press the
CANCEL
[F2] key to cancel the operation.
CAUTION :
Once the track data is erased, it cannot be recovered (No UNDO). Use extra caution when
you use this TRACK ERASE function.
To Next Page
Loading...
Need help?
General
