Akai DPS12 - FlangeDelay (G); PhaserDelay (G)

141
Chapter 13: Using the effects
FLANGE>DELAY (G)
This effect consists of a flanger effect and a delay effect connected in series.
4
1
3
B
5
6
Parameter Setting range Function
1 Rate 0.1Hz – 10.0Hz Sets the speed of LFO for the flanger effect.
2 Depth 0 – 127 Sets the depth of LFO for the flanger effect.
3 Fdback 0 – 127 Sets the amount of the flanger effect that is fed back.
4 Delay 1ms – 1500ms Sets the delay time of the delay effect.
5 Fdback 0 – 127 Sets the amount of the delay effect that is fed back.
6 Bounce ON/OFF Pans the delay sound left and right when turned on.
PHASER>DELAY (G)
This effect consists of a phaser effect and a delay effect connected in series.
4
1
3
B
5
6
Parameter Setting range Function
1 Rate 0.1Hz – 10.0Hz Sets the speed of LFO for the phaser effect.
2 Depth 0 – 127 Sets the depth of LFO for the phaser effect.
3 Fdback 0 – 127 Sets the amount of the phaser effect that is fed back.
4 Delay 1ms – 1500ms Sets the delay time of the delay effect.
5 Fdback 0 – 127 Sets the amount of the delay effect that is fed back.
6 Bounce ON/OFF Pans the delay sound left and right when turned on.