87
Chapter 9: Control Panel
The parameters have the following functions:
1
REPEAT
[F4] key (repeat)
When this parameter is turned on, the PDS12 plays back data between the IN point and OUT point (specified
by the [IN] and [OUT] keys) repeatedly. See page 45 for more information.
2
REHEARSAL
[F5] key (rehearsal)
When this parameter is turned on, actual recording is not performed. Only the monitoring source (input or
track playback) is changed. You can use this function for rehearsing the Auto Punch In/Out operation. See page
51 for more information.
3
AUTO PUNCH
[F6] key (Auto Punch)
When this parameter is turned on, you can perform Auto Punch In/Out. After the Auto Punch In/Out operation
is complete, this parameter automatically turns off. See page 50 for more information.
✐
TIP :
You may want to have this Control Panel displayed during the repeated Auto Punch In/Out
operations.
VARI PITCH
This function utilizes parameters to adjust the recording and playback speeds.
A 2
The DPS12 provides a Vari Pitch function that enables you to change recording and playback speeds. You can set
the speed variation and on and off in this screen.
1
Amount
(pitch variation)
This numeric field allows you to specify the amount of speed variation in percentage, based on 100% as a
standard speed. Use the [CURSOR] key to move the cursor to this field, and turn the [JOG] dial to adjust the
value.
2
VARI PITCH
[F6] key (Vari Pitch on/off)
Use the [F6] key to toggle the Vari Pitch function on and off. When the function is turned on, the recording and
playback speeds use the value specified in the
Amount
field.
To Next Page
Loading...
Need help?
General
