C315 Indoor Monitor Administraor Guide
To check and configure the network connection on the device web Network > Basic
interface.
Parameter Set-up:
•
DHCP: select the DHCP mode by checking the DHCP box. DHCP mode is the default
network connection. If the DHCP mode is selected, then the indoor monitor will be
assigned by the DHCP server with IP address, subnet mask, default gateway, and
DNS server address automatically.
•
Static IP: select the Static IP mode by checking off the DHCP square box. When
static IP mode is selected, then the IP address, subnet mask, default gateway, and
DNS servers address have to be manually configured according to your actual
network environment.
•
IP Address: set up the IP address if the static IP mode is selected.
•
Subnet Mask: set up the subnet mask according to your actual network environment.
•
Default Gateway: set up the correct gateway default gateway according to the IP
address of the default gateway.
•
LAN DNS1/2 Server: set up DNS (Domain Name Server) according to your actual
network environment. Preferred DNS Server is the primary DNS server address while
the Alternate DNS Server is the secondary server address and the door phone
connects to the alternate DNS server when the preferred DNS server is unavailable.
To Next Page
Loading...
Need help?
General
