C315 Indoor Monitor Administraor Guide
Note
•
Please refer to the chapter on Network Setting&Other Connection for the
configuration of the Ethernet and wireless network connection.
5 Access the Device
5.1
Device Start-up Network Selection
Akuvox indoor monitor system settings can be either accessed on the device directly or on
the device's web interface. After the device boots up initially, you are required to select the
network connection for the device. You can either select ethernet or wireless network
connection according to your need.
5.2
Device Home Screen Type Selection
Akuvox indoor monitor supports two different home screen display modes- Call list
simple, Classic. Choose one suitable mode for your scenarios.
To Next Page
Loading...
Need help?
General
