Akuvox C315 Series - Door Access Control Configuration; Relay Switch Setting

C315 Indoor Monitor Administraor Guide
www.akuvox.com
87
16 Door Access Control Configuration
16.1 Relay Switch Setting
16.1.1 Local Relay Setting
Local relays in Akuvox indoor monitor can be used to trigger the relay for the door access
and trigger the chime bell as needed in different scenarios. You can do this configuration
on web Phone > Relay > Relay Setting > Local Relay interface.
Parameter Set-up:
• Relay Delay: set the relay delay time after the relay is triggered.
• Relay Type: set relay action type. There are two types of the relay, chime bell and
open door.
• Chime Bell: when there is a call, the chime bell will ring.