C315 Indoor Monitor Administraor Guide
10 Network Setting & Other Connection
10.1
Device Network Configuration
You can check for the device's network connection info and configure the default DHCP
mode (Dynamic Host Configuration Protocol) and static IP connection for the device
either on the device or on the device web interface.
10.1.1
Configuring Network Connection on the Device
To check and configure the network connection on the device More > Setting > Advance >
Network.
Parameter Set-up:
•
DHCP: select the DHCP mode by moving the toggle switch to the right. DHCP mode
is the default network connection. If the DHCP mode is turned on, then the door
phone will be assigned by the DHCP server with IP address, subnet mask, default
gateway, and DNS server address automatically.
To Next Page
Loading...
Need help?
General
