C315 Indoor Monitor Administraor Guide
17 Lift Control
You can summon a lift at home via the lift control feature.
17.1
Configure Lift Control
To enable and set the display status Lift icon on device web Phone > Lift> Lift Control
interface.
Parameter Set-up:
•
Status: click to enable or disable the lift1 button.
•
Icon: click to select icon for the button.
•
Label: enter the title for the button.
•
HTTP Command: select http:// or https:// for head of http command and enter http
command.
17.2
Configure Lift Control Prompt
When the lift controller receives the HTTP command, it will give feedback on the current lift
status with a prompt. To do this configuration on web Phone > Lift> Hints interface. Edit
the HTTP Status Code, which is the feedback code from the Lift controlboard.
To Next Page
Loading...
