C315 Indoor Monitor Administraor Guide
24 Debug
24.1
System Log for Debugging
System log in the indoor monitor can be used for debugging purpose. If you want to export
the system out to a local PC or to a remote server for debugging , you can set up the
function on the web Upgrade > Advanced > System Log interface.
Parameter Set-up:
•
LogLevel: select log levels from 1 to 7 levels. You will be instructed by Akuvox
technical staff about the specific log level to be entered for debugging purpose. The
default log level is 3, the higher the level is, the more complete the log is.
•
Export Log: click the Export tab to export the temporary debug log file to a local PC.
•
Export Debug Log: click the Export tab to export debug log file to a localPC.
•
Remote System Log: select Enable or Disable if you want to enable or disable the
remote system log.
•
Remote System Server: enter the remote server address to receive the device And
the remote server address will be provided by Akuvox technical support.
To Next Page
Loading...
Need help?
General
