C315 Indoor Monitor Administraor Guide
4 Introduction to Configuration Menu
Status: This section gives you basic information such as product information, network
information, account information, etc.
Account: This section concerns the SIP account, SIP server, proxy server, transport
protocol type, audio&video codec, DTMF, session timer, etc.
Network: This section mainly deals with DHCP&Static IP setting, RTP port setting, device
deployment, etc.
Phone: This section includes time, language, call feature, display setting, audio, multicast,
relay, third-party APP, intercom, monitor, Smart Living, web view, etc.
Contacts: This section allows the user to configure the local contact list stored on the
device.
Upgrade: This section covers firmware upgrade, device reset&reboot, configuration file
auto-provisioning, and PCAP.
Security: This section is for password modification, account status & session time-out
configuration, client certificate, as well as service location, etc.
Device Settings: This section includes the RTSP setting, and power output setting.
Arming: This section covers the configuration including arming zone setting, arming mode,
disarm code, and alarm action.
Mode selection:
•
Discovery mode: It is a plug and play configuration mode. Akuvox devices will
configure themselves automatically when users power on the devices and connect
them to the network. It is a super time-saving mode and it will greatly bring users
convenience by reducing manual operations. This mode requires no prior
configurations previously by the administrator.
•
Cloud mode: Akuvox SmartPlus is an all-in-one management system. Akuvox Cloud
is a mobile service that allows audio, video, and remote access control between
smartphones and Akuvox intercoms. All configurations in the device will be issued
automatically from the cloud. If users decide to use Akuvox SmartPlus, please
To Next Page
Loading...
