C315 Indoor Monitor Administraor Guide
11.6
SIP Call DND & Return Code Configuration
DND (Do not disturb) setting allows you not to be disturbed by any unwanted incoming SIP
calls. You can set up DND-related parameters properly on the device web Phone > Call
Feature > DND interface to block SIP calls you do not intend to answer. In the meantime,
you can also define the code to be sent to the SIP server when you want to reject the call.
Parameter Set-up:
•
DND: check Whole Day or Schedule to enable the DND function. DND function is
disabled by default.
•
Return Code When DND: select what code should be sent to the calling device via the
SIP server. 404 for Not found; 480 for Temporary Unavailable; 486 for Busy Here.
•
Schedule: enable DND schedule for your indoor monitor. To configure a specific time
to enable the DND feature. If you choose Schedule for DND, the Whole Day tab is
available.
•
DND Start Time: the start time for DND schedule.
•
DND End Time: the end time for DND schedule.
11.7
Device Local RTP configuration
For the device network data transmission purpose, device needs to be set up with a range
of RTP ports (Real-time Transport Protocol) for establishing an exclusive range of data
transmission in the network. To set up device local RTP on web Network > Advanced >
Local RTP interface.
To Next Page
Loading...
