C315 Indoor Monitor Administraor Guide
Note
•
If a server has these two types of configuration files, then IP devices will first
access the general configuration files before accessing the MAC-based
configuration files.
configuration provisioning.
The difference between the two types of configuration files is shown below:
•
General configuration provisioning: a general file is stored in a server from which all
the related devices will be able to download the same configuration file to update
parameters on the devices. For example, cfg.
•
MAC-based configuration provisioning: MAC-based configuration files are used for
auto-provisioning on a specific device as distinguished by its unique MAC number.
And the configuration files named with the device MAC number will be matched
automatically with the device MAC number before being downloaded for the
provisioning on the specific device.
18.3
Autop Schedule
Akuvox provides you with different Autop methods that enable the indoor monitor to
perform provisioning for itself in a specific time according to your schedule. To set up the
schedule on the device web Upgrade > Advanced > Automatic Autop interface.
Please see the picture below:
Parameter Set-up:
•
Power On: select Power on, if you want the device to perform Autop every time it
boots up.
To Next Page
Loading...
Need help?
General
