C315 Indoor Monitor Administraor Guide
15.2
RTSP Authentication
You can set the RTSP authentication to allow the indoor monitor to be monitored via RTSP
audio stream. For example, you can apply this feature in the baby's room where babies can
be monitored on an audio basis for safety.
To set it up, go to Device Setting > Basic > RTSP Setting.
Parameter Set-up:
•
RTSP Audio Enable: enable it if you want to monitor the device via RTSP audio
stream.
•
Authorization Type: select the authorization type (Basic, Digest). Select None if you
allow all types of authorization types for the RTSP audiostream.
•
User Name: type in the username used for the authentication.
•
Password: type in the username used for the authentication.
15.3
Alarm and Arming Configuration
The alarm feature is used to connect some alarm detection devices to protect your home's
safety. Akuvox indoor monitors support 8 alarm connectors which means you can connect
8 different alarm sensors in different rooms of your house. For example, by connecting a
smoker sensor in your kitchen to detect if the gas is leaking, the indoor monitor will ring
and send the alarm message to the target, like community property. Before checking alarm
feature on the device screen, you need to set up the Arming icon on the home page or
more page on the device web Phone > Key/Display interface.
To Next Page
Loading...
Need help?
General
