Akuvox C315 Series - Security; Monitor and Image

C315 Indoor Monitor Administraor Guide
www.akuvox.com
67
15 Security
15.1 Monitor and Image
15.1.1 Monitor Setting
You can configure the monitor setting on the web Phone > Monitor interface. Enter the IP/
SIP number of the door phone in the device number and fill in the device name. Then set
up the RTSP address. The RTSP format of the Akuvox door phone is rtsp://deviceIP/live/
ch00_0. You can enable or disable the display in the call. If enabled, when there is an
incoming call from the monitor, the video will be displayed.
Parameter Set-up:
• Device Number: to enter the IP address or SIP number of the corresponding camera.