Akuvox C315 Series - Contact Display

C315 Indoor Monitor Administraor Guide
www.akuvox.com
38
Note
• If you want to remove the contact from the blocklist on the web interface,
you can change the group to the Default when editing the contact.
9.2.4 Contact Display
You can configure the contact display order and control whether to display the discovery
device on the device.
Parameters Set-up:
• Contacts Sort By: there are three modes Default, ASCII code, and Created time
mode for showing the contact list.
• Show Local Contacts Only: if you enable the function, the contact on the device will
only show the local phonebook, and the contact for discovery mode will be hidden.