camera heads, video equipment, etc.) produced by different manufacturers are
completely interoperable. After the setting is complete, you can enter the
ONVIF URL on the third party device to view the video stream.
To do the configuration, you can do as follows:
1. Click Intercom - ONVIF.
2. Set up parameter properly.
3. Click Submit tab for validation and Cancel tab for cancellation.
Parameters Set-up:
Onvif Mode: Select “ Discoverable” or “ Non- Discoverable” to turn on or
turn off the the Onvfi mode. If you select “ Discoverable” then the video
from the door phone camera can be searched by other devices and vice
versa. Onvif mode is “ Discoverable” by default
UserName: Enter the user name. The user name is “ admin” by default
Password: Enter the password. The password is “ admin” by default.
The URL of Onvif: http://IP address:80/onvif/device_service
5.10.Log
5.10.1. Call Log
If you want to check on the calls inclusive of the dial-out calls , received calls
and missed calls in a certain period of time, you can check and search the call
log on the device web interface and export the call log from the device if
To Next Page
Loading...
Need help?
General
