2. Enter the NPT server you obtained in the field of the NPT sever.
3. Press the Submit button to save the setting and press the Cancel button
to cancel the setting.
Parameters Set-up:
NTP Server: Enter the NPT server you obtained in the NPT server field.
5.2.2. Infrared LED Setting
Infrared LED is applied in the dark environment in which a resident might not
be able to see a visitor clearly via the video from the door phone. If the infrared
LED is turned off, the door phone will turn to night mode so that you can have a
clear view of the visitor.
To do the set-up on the device web interface, you can start with the following
process:
1. Click Intercom - Advanced to find Photoresistor.
2. Adjust the parameters and press the Submit tab to validate the setting.
3. Click Read to confirm the photoresistor value under the current ambient
brightness.
Parameters Set-up:
To Next Page
Loading...
Need help?
General
