Akuvox R20B Series User Manual

34
R20B
Admin Guide
SIP account.
 Min Local SIP Port: To configure maximum local SIP port for designated
SIP account.
 Caller ID Header: To choose caller ID header format. There are 6 options -
FROM, PAI, PAI-FROM, RPID-FROM, PAI-RPID-FROM, RPID-PAI-FROM.
 Provisional Response ACK: 100% reliability for all provisional messages,
this means it will send ACK every time the phone receives a provisional SIP
message from SIP server.
 Register with user=phone: If enabled, the phone will send user=phone
within SIP message.
 Anonymous Call: If enabled, R20K will block its information when calling
out.
 Anonymous Call Rejection: If enabled, calls who block their information
will be screened out.
 Missed Call Log: If enabled, any missed call will be recorded into call log.
 Prevent Hacking: If enabled, it will prevent SIP call from attacking in the
Internet
5.4.6. Push Button Call
R20B has 5 push buttons which are used to call out. Each push button can be
setup up to 6 sip numbers or IP addresses, that means users can call out 6
numbers at one time by pressing push button.
To do so, you can do as follows:
1. Click Intercom - Basic to find Push Button.
2. Enter sip accounts or IP addresses for the push button, click Submit tab to

Akuvox R20B Series Specifications

General

Brand	Akuvox
Model	R20B Series
Category	Intercom System
Language	English