Parameters Set-up
：
Name: Enter the contact name, which is required.
Phone: Enter the phone number of the contact, which is required.
Group: Click the green tab to select the group name you have created.
You cannot select the group name If no group name has been created.
Account: Select which sip account will used to to call out. If using IP direct
call, it is not available.
Priority of Call: Up to 3 numbers in one group and setup the call
sequence for these numbers.
5.6.3. Contact Management
You can search, display ,edit and delete the contacts in your phone book. More
over, you can also dial out using the contact phone number directly.
To do so , you can do as follows:
1. Click Access Whitelist - Access Whitelist.
2. Select the searching range in the Contact field.
3. Enter the contact information and press Search tab.
4. Check to edit the contact information in “Contact setting”in the same
interface.
5. Move down to Contact Setting and press Edit tab to complete the edit.
6. Press delete tab if you want to delete any contact.
To Next Page
Loading...
Need help?
General
