5.11.Debug
5.11.1. System Log for Debugging
System log in the door phone can be used for debugging purpose. System log
records all operation log of device itself. If you want to export the system out
to a local PC or to a remote server for debugging.
To set up the function, you can do as follows:
1. Click Upgrade - Advanced to find System Log.
2. Enter the parameters properly.
3. Click Export tab to export logs.
4. Click Submit tab for validation and Cancel for cancellation.
Parameters Set-up:
LogLevel: Select log levels from 1 to 7 levels. You will be instructed by
Akuvox technical staff about the specific log level to be entered for
debugging purpose. The default log level is “3” The higher level means the
more specific syslog is saved to a temporary file.
Export Log: Click the Export tab to export temporary debug log file to a
local PC
Export Debug Log: Click the Export tab to export debug log file to a local
PC
Remote System Log: Select “Enable” or “ Disable” if you wan to enable or
disable the remote system log.
Remote System Server: Enter the remote server address (URL) to
To Next Page
Loading...
Need help?
General
