make it general configuration provisioning.);
2. For general configuration provisioning: r0000000000xx.cfg (There are 12
digits in total, for example: C315 --> r000000000115, R29 -->
r000000000029 )
3. For MAC based configuration provisioning: <MAC_Address of the
device>.cfg, eg. 0C110504AE5B.cfg.
4. Upload firmware to DHCP/TFTP/FTP/HTTP/HTTPS server;
5. Edit AutoP config template;
6. Upload the AutoP config template to DHCP/TFTP/FTP/HTTP/HTTPS
server;
7. Enter TFTP URL into the box(under the path “Upgrade-Advanced”) and
click AutoP Immediately
8. You can also power device up to make it work when PNP server is
disabled
5.16.Backup
Configuration files can be imported to or exported out of the device to your
local PC on the device web interface if needed.
To do so , you can do as follows:
1. Click Upgrade - Advanced to to find Others.
2. Select config file to be imported.
To Next Page
Loading...
Need help?
General
