5.4.8. Web Call
In addition to make IP/SIP call directly on the device, you can also make the
call on the device web interface without approaching to device physically for
testing purpose etc.
To do so , you can do as follows
1. Click Intercom - Basic to find Web Call.
2. Enter the number you want to dial out in the Dial field using a specific SIP
account.
3. Click Dial tab to initiate the calling.
4. Click Hang Up tab to hang up.
Parameters Set-up:
Auto/Account1/Account2: To choose a suitable sip account to make a
web call. If you call out using IP address, Account selection is no need to
chosen.
5.4.9. Multicast
Multicast uses one-to-many mode to communicate in a range. Door phone can
be a listener and receive the audio from the listened part.
To do so, you can do as follows:
1. Click Phone - Multicast.
2. Setup the parameters and click Submit tab to save.
To Next Page
Loading...
Need help?
General
