Back Returns to the previous menu.
Note 2:
If the OmniPCX is managed in Charge units, then Unit threshold is displayed.
After pressing the Apply key, return to the previous menu modified accordingly.
For example:
Cost used to delete the filtering per cost threshold.
The sets contained in the list are tracked if the cost of their calls exceeds the value
entered.
• Pressing the >Time key displays:
Modify Modifies the existing value of the duration threshold.
Apply Confirms the value of the duration threshold entered.
Back Returns to the previous menu.
After pressing the Apply key, return to the previous menu modified accordingly.
For example:
TimeOf Used to delete the filtering per duration threshold.
The display indicates that the users contained in the list are put under surveillance if
the duration of their calls exceeds the value entered.
Chapter
6
"() ') % !
6-16
To Next Page
Loading...
