Charge To display the cost/charge units since the last reset.
Last$ To display the cost/charge units of the last user call.
CallNb To display the number of calls made by this user.
Reset To reset the counter for this user.
- By pressing the Screen (or Filter) key, the attendant can access the screening criteria
used in call detail collection This displays; for example:
List Tracking of the users contained in this list.
NoThre No tracking.
All Tracking of all users.
>Cost Filters tracked users according to a call cost threshold.
>Time Filters tracked users according to a call duration threshold.
Note 1:
If the OmniPCX is managed in "Charge unit", rather than "Cost", then Unit is displayed instead of
>Cost.
• Pressing the NoThre key changes the key label to List and vice versa.
• Pressing the All key changes the label of this key to NoThre and vice versa.
• Pressing the >Cost key displays:
Modify Modifies the existing value of the cost threshold.
Apply Confirms the value of the cost threshold entered.
"() ') % !
6-15
To Next Page
Loading...
