Alcatel-Lucent 7210 SAS M User Manual

Show Commands
Page 176 7210 SAS M, T, X, R6, Mxp MPLS Configura-
tion Guide
bypass-tunnel
Syntax bypass-tunnel [to ip-address] [protected-lsp [lsp-name]] [dynamic | manual] [detail]
Context show>router>mpls
Description If fast reroute is enabled on an LSP and the facility method is selected, instead of creating a separate
LSP for every LSP that is to be backed up, a single LSP is created which serves as a backup for a set
of LSPs. Such an LSP tunnel is called a bypass tunnel.
Parameters ip-address — Specify the IP address of the egress router.
lsp-name — Specify the name of the LSP protected by the bypass tunnel.
dynamic — Displays dynamically assigned labels for bypass protection.
manual — Displays manually assigned labels for bypass protection.
detail — Displays detailed information.
Output MPLS Bypass Tunnel Output Fields — The following table describes MPLS bypass tunnel out-
put fields.
Sample Output
*A:Dut-A>show>router>mpls# bypass-tunnel
===============================================================================
MPLS Bypass Tunnels
===============================================================================
Legend : m - Manual d - Dynamic
===============================================================================
To State Out I/F Out Label Reserved Protected Type
BW (Kbps) LSP Count
-------------------------------------------------------------------------------
10.10.36.3 Up lag-1:10 131066 0 2 d
10.10.23.2 Up lag-1:10 130454 0 4 d
10.10.46.4 Up lag-2 130592 0 4 d
10.10.36.6 Up lag-2 130591 0 2 d
-------------------------------------------------------------------------------
Bypass Tunnels : 4
===============================================================================
*A:Dut-A>show>router>mpls#
To
The system IP address of the egress router.
State
The LSP’s administrative state.
Out I/F
Specifies the name of the network IP interface.
Out Label
Specifies the incoming MPLS label on which to match.
Reserved BW (Kbps)
Specifies the amount of bandwidth in megabits per second (Mbps)
reserved for the LSP.

Alcatel-Lucent 7210 SAS M Specifications

General

Brand	Alcatel-Lucent
Model	7210 SAS M
Category	Switch
Language	English