Alcatel-Lucent 7450 - Page 104

Command Hierarchies
Page 104 7450 ESS System Mangement Guide
configure>service>vpls>video-interface>cpu-protection policy-id
configure>service>vprn>interface>cpu-protection policy-id
configure>service>vprn >interface>sap>cpu-protection policy-id [mac-monitoring]|[eth-cfm-
monitoring [aggregate][car]]
configure>service>vprn>network-interface>cpu-protection policy-id
configure>service>vprn>subscriber-interface>group-interface>sap>cpu-protection policy-id [mac-
monitoring]|[eth-cfm-monitoring [aggregate][car]]
configure>subscriber-mgmt>msap-policy>cpu-protection policy-id [mac-monitoring ]
Distributed CPU Protection Commands
config
—system
—security
— dist-cpu-protection
— policy policy-name [create]
—no policy
— description description-string
—no description
— [no] local-monitoring-policer policer-name [create]
— [no] description “description-string”
— rate {packets {ppi | max} within seconds [initial-delay
packets] | kbps {kilobits-per-second | max} [mbs size]
[bytes|kilobytes]}
—no rate
— [no] log-events [verbose]
— protocol name [create]
—no protocol name
— dynamic-parameters
— detection-time seconds
— exceed-action
{discard [hold-down seconds] | low-
priority [hold-down seconds] | none}
— log-events [verbose]
—no log-events
— rate {packets {ppi | max} within seconds [initial-
delay packets] | kbps {kilobits-per-second | max} [mbs
size] [bytes|kilobytes]}
— enforcement {static policer-name | dynamic {mon-
policer-name | local-mon-bypass }}
— static-policer policer-name [create]
—no static-policer policer-name
— description description-string
—no description
— detection-time seconds
—no detection-time
— exceed-action {discard [hold-down seconds
] | low-prior-
ity [hold-down seconds] | none}
— log-events [verbose]
—no log-events