Alcatel-Lucent 7450 - Table 23: Show Source Address Output Fields

Security Commands
Page 262 7450 ESS System Mangement Guide
Sample Output
A:ALA-7# show system security profile administrative
===============================================================================
User Profile
===============================================================================
User Profile : administrative
Def. Action : permit-all
-------------------------------------------------------------------------------
Entry : 10
Description :
Match Command: configure system security
Action : permit
-------------------------------------------------------------------------------
Entry : 20
Description :
Match Command: show system security
Action : permit
-------------------------------------------------------------------------------
No. of profiles:
===============================================================================
A:ALA-7#
source-address
Syntax source-address
Context show>system>security
Description This command displays source-address configured for applications.
Output Source Address Output — The following table describes source address output fields.
Sample Output
A:SR-7# show system security source-address
===============================================================================
Source-Address applications
===============================================================================
Application IP address/Interface Name Oper status
Table 23: Show Source Address Output Fields
Label Description
Application
Displays the source-address application.
IP address
Interface Name
Displays the source address IP address or interface name.
Oper status
Up — The source address is operationally up.
Down — The source address is operationally down.