SNMP
7450 ESS System Mangement Guide Page 313
information
Syntax information
Context show>system
Description This command lists the SNMP configuration and statistics.
Output System Information Output Fields — The following table describes system information output
fields.
Table 30: Show System Information Output Fields
Label Description
System Name
The name configured for the device.
System Contact
The text string that identifies the contact name for the device.
System Location
The text string that identifies the location of the device.
System Coordinates
The text string that identifies the system coordinates for the
device location. For example, “37.390 -122.0550" is read as lat-
itude 37.390 north and longitude 122.0550 west.
System Up Time
The time since the last reboot.
SNMP Port
The port which SNMP sends responses to management
requests.
SNMP Engine ID
The ID for either the local or remote SNMP engine to uniquely
identify the SNMPv3 node.
SNMP Max Message Size
The maximum size SNMP packet generated by this node.
SNMP Admin State
Enabled — SNMP is administratively enabled.
Disabled — SNMP is administratively disabled.
SNMP Oper State
Enabled — SNMP is operationally enabled.
Disabled — SNMP is operationally disabled.
SNMP Index Boot Status
Persistent — Persistent indexes at the last system reboot
was enabled.
Disabled — Persistent indexes at the last system reboot was
disabled.
SNMP Sync State
The state when the synchronization of configuration files
between the primary and secondary s finish.
Telnet/SSH/FTP Admin
Displays the administrative state of the Telnet, SSH, and FTP
sessions.
To Next Page
Loading...
