Alcatel-Lucent 7450 - Table 33: Show Source Access List Output Fields

Page 326 7450 ESS System Mangement Guide
Communities
==============================================================================
community access view version group name
src-access-list authFailures
------------------------------------------------------------------------------
my-public2 r no-security v1 v2c snmp-ro
my-list1 5
==============================================================================
A:ALA-1#
src-access-list
Syntax src-access-list [list-name]
Context show>system>security>snmp
Description This command displays source access lists and the hosts for each. Including the list-name parameter
modifies the output show only the specified src-access-list.
Output Source Access List Ouput — The following table describes the source access list output fields.
Sample Output
A:ALA-1# show system security snmp src-access-list
=============================================================================
Source Access Lists
=============================================================================
List Name
HostName Host Address
-----------------------------------------------------------------------------
L1
H1 100.100.100.1
H2 100.100.100.2
L2
HA 100.100.101.1
HB 100.100.101.2
-----------------------------------------------------------------------------
Total Access Lists: 2
=============================================================================
A:ALA-1#
Table 33: Show Source Access List Output Fields
Label Description
List Name
The name of the src-access-list.
Host Name
The name of the src-host.
Host Address
The IP address of the src-host.
Total Access Lists
The total number of source access lists displayed.