Alcatel-Lucent 7450 - Deleting a Log Filter

Deleting a Log Filter
Page 450 7450 ESS System Mangement Guide
Deleting a Log Filter
Use the following CLI syntax to delete a log filter:
CLI Syntax: config>log
no filter filter-id
The following output displays the current log filter configuration:
A:ALA-12>config>log>filter# info
----------------------------------------
...
filter 1
description "This allows <n>."
entry 1
action drop
match
application eq "user"
number eq 2001
exit
exit
exit
...
----------------------------------------
A:ALA-12>config>log>filter#
The following displays an example of the command usage to delete a log filter:
Example: config>log# no filter 1
Modifying Event Control Parameters
Use the following CLI syntax to modify event control parameters:
CLI Syntax: config>log
event-control application-id [event-name|event-number] gen-
erate[severity-level] [throttle]
event-control application-id [event-name|event-number] sup-
press
The following displays the current event control configuration:
A:ALA-12>config>log# info
----------------------------------------------
...
event-control "ospf" 2014 generate critical
...
----------------------------------------------
A:ALA-12>config>log#