SNMP
7450 ESS System Mangement Guide Page 293
Basic SNMP Security Configuration
This section provides information to configure SNMP parameters and provides examples of
common configuration tasks. The minimal SNMP parameters are:
For SNMPv1 and SNMPv2c:
• Configure community string parameters.
For SNMPv3:
• Configure view parameters
• Configure SNMP group
• Configure access parameters
• Configure user with SNMP parameters
The following displays SNMP default views, access groups, and attempts parameters.
A:ALA-1>config>system>security>snmp# info detail
----------------------------------------------
view iso subtree 1
mask ff type included
exit
view no-security subtree 1
mask ff type included
exit
view no-security subtree 1.3.6.1.6.3
mask ff type excluded
exit
view no-security subtree 1.3.6.1.6.3.10.2.1
mask ff type included
exit
view no-security subtree 1.3.6.1.6.3.11.2.1
mask ff type included
exit
view no-security subtree 1.3.6.1.6.3.15.1.1
mask ff type included
exit
access group snmp-ro security-model snmpv1 security-level no-auth-no-
privacy read no-security notify no-security
access group snmp-ro security-model snmpv2c security-level no-auth-no-
privacy read no-security notify no-security
access group snmp-rw security-model snmpv1 security-level no-auth-no-
privacy read no-security write no-security notify no-security
access group snmp-rw security-model snmpv2c security-level no-auth-no-
privacy read no-security write no-security notify no-security
access group snmp-rwa security-model snmpv1 security-level no-auth-no-
privacy read iso write iso notify iso
access group snmp-rwa security-model snmpv2c security-level no-auth-no-
privacy read iso write iso notify iso
access group snmp-trap security-model snmpv1 security-level no-auth-no-
privacy notify iso
access group snmp-trap security-model snmpv2c security-level no-auth-
no-privacy notify iso
attempts 20 time 5 lockout 10
To Next Page
Loading...
