Alcatel-Lucent 7450 - Configuring an Accounting Custom Record

Configuring a Syslog Target
Page 438 7450 ESS System Mangement Guide
Configuring an Accounting Custom Record
A:ALA-48>config>subscr-mgmt>acct-plcy# info
----------------------------------------------
..
custom-record
queue 1
i-counters
high-octets-discarded-count
low-octets-discarded-count
in-profile-octets-forwarded-count
out-profile-octets-forwarded-count
exit
e-counters
in-profile-octets-forwarded-count
in-profile-octets-discarded-count
out-profile-octets-forwarded-count
out-profile-octets-discarded-count
exit
exit
significant-change 20
ref-queue all
i-counters
in-profile-packets-forwarded-count
out-profile-packets-forwarded-count
exit
e-counters
in-profile-packets-forwarded-count
out-profile-packets-forwarded-count
exit
exit
..
----------------------------------------------
A:ALA-48>config>subscr-mgmt>acct-plcy#
The following is an example custom record configuration.
Dut-C>config>log>acct-policy>cr# info
----------------------------------------------
aa-specific
aa-sub-counters
short-duration-flow-count
medium-duration-flow-count
long-duration-flow-count
total-flow-duration
total-flows-completed-count
exit
from-aa-sub-counters
flows-admitted-count
flows-denied-count
flows-active-count
packets-admitted-count
octets-admitted-count
packets-denied-count
octets-denied-count
max-throughput-octet-count