SNMP
7450 ESS System Mangement Guide Page 325
Sample Output
Note: The system-created communities that begin with “cli-” are only used for internal CLI
management purposes and are not exposed to external SNMP access.
A:ALA-1# show system security snmp community
==============================================================================
Communities
==============================================================================
community access view version group name
------------------------------------------------------------------------------
cli-li-readwrite n/a li-view v2c cli-li-readwrite
cli-readonly r iso v2c cli-readonly
cli-readwrite rw iso v2c cli-readwrite
my-private1 rw iso v1 v2c snmp-rwa
my-public2 r no-security v1 v2c snmp-ro
test-123 rwa n/a v2c snmp-trap
------------------------------------------------------------------------------
No. of Communities: 6
==============================================================================
A:ALA-1#
A:ALA-1# show system security snmp community "my-public2"
==============================================================================
Table 32: Show Community Output Fields
Label Description
Community
The community string name for SNMPv1 and SNMPv2c access only.
Access
r — The community string allows read-only access.
rw — The community string allows read-write access.
rwa — The community string allows read-write access.
mgmt — The unique SNMP community string assigned to the man-
agement router.
View
The view name.
Version
The SNMP version.
Group Name
The access group name.
src-access-list
The name of the list of source IP addresses that are allowed to use the
community, as configured using the community configuration com-
mand.
authFailures
The number of SNMP requests that have failed validation using this
community.
No of Communities
The total number of configured community strings.
To Next Page
Loading...
