Alcatel-Lucent 7450 - Table 21: Show Per-Peer-Queuing Output Fields

Security Commands
Page 260 7450 ESS System Mangement Guide
Sample Output
A:ALA-7# show system security password-options
===============================================================================
Password Options
===============================================================================
Password aging in days : none
Time required between password changes : 0d 00:10:00
Number of invalid attempts permitted per login : 3
Time in minutes per login attempt : 5
Lockout period (when threshold breached) : 10
Authentication order : radius tacplus local
User password history length : disabled
Accepted password length : 6..56 characters
Credits for each character type : none
Required character types : none
Minimum number different character types : 0
Required distance with previous password : 5
Allow consecutively repeating a character : always
Allow passwords containing username : yes
Palindrome allowed : no
===============================================================================
A:ALA-7#
per-peer-queuing
Syntax per-peer-queuing
Context show>system>security
Description This command enables or disables CPMCFM hardware queuing per peer. TTL security only operates
when per-peer-queuing is enabled.
Output Per-Peer-Queuing Output — The following table describes per-peer-queuing output fields.
Table 21: Show Per-Peer-Queuing Output Fields
Label Description
Per Peer Queuing
Displays the status (enabled or disabled) of CPM hardware queuing
per peer.
Total Num of
Queues
Displays the total number of hardware queues.
Num of Queues In
Use
Displays the total number of hardware queues in use.