Alcatel-Lucent 7450 - Radius Commands; Ssh Commands

Command Hierarchies
Page 108 7450 ESS System Mangement Guide
RADIUS Commands
config
—system
— security
—RADIUS Commands — [no] radius
— access-algorithm {direct | round-robin}
— no access-algorithm
— [no] accounting
— accounting-port port
—no accounting-port
— [no] authorization
— [no] interactive-authentication
— port port
—no port
— retry count
—no retry
— server server-index address ip-address secret key [hash | hash2]
—no server server-index
— [no] shutdown
— timeout seconds
—no timeout
— [no] use-default-template
SSH Commands
config
—system
— security
—SSH Commands — ssh
— client-cipher-list protocol-version version
— cipher index name cipher-name
—no cipher index
— [no] preserve-key
— server-cipher-list protocol-version version
— cipher index name cipher-name
—no cipher index
— [no] server-shutdown
— [no] version SSH-version
TACPLUS Commands
config
—system
— security
—TACACS+ Commands — [no] tacplus
— accounting [record-type {start-stop | stop-only}]
—no accounting
— [no] authorization [use-priv-lvl]
— [no] interactive-authentication
— [no] priv-lvl-map
— priv-lvl priv-lvl user-profile-name
—no priv-lvl priv-lvl
— server server-index address ip-address secret key [hash | hash2] [port port]
—no server server-index