Security
7450 ESS System Mangement Guide Page 179
authorization
Syntax [no] authorization
Context config>system>security>radius
Description This command configures RADIUS authorization parameters for the system.
Default no authorization
interactive-authentication
Syntax [no] authorization
Context config>system>security>radius
Description This command enables RADIUS interactive authentication for the system. Enabling interactive-
authentication forces RADIUS to fall into challenge/response mode.
Default no authentication
port
Syntax port port
no port
Context config>system>security>radius
Description This command configures the TCP port number to contact the RADIUS server.
The no form of the command reverts to the default value.
Default 1812 (as specified in RFC 2865, Remote Authentication Dial In User Service (RADIUS) )
Parameters port — The TCP port number to contact the RADIUS server.
Values 1 — 65535
radius
Syntax [no] radius
Context config>system>security
Description This command creates the context to configure RADIUS authentication on the router.
Implement redundancy by configuring multiple server addresses for each router.
The no form of the command removes the RADIUS configuration.
To Next Page
Loading...
