Alcatel-Lucent 7450 - Modifying a Log File

Event and Accounting Logs
7450 ESS System Mangement Guide Page 441
Modifying a Log File
Use the following CLI syntax to modify a log file:
CLI Syntax: config>log
log-id log-id
description description-string
filter filter-id
from {[main] [security] [change] [debug-trace]}
to console
to file file-id
to memory [size]
to session
to snmp [size]
to syslog syslog-id}
The following displays the current log configuration:
ALA-12>config>log>log-id# info
----------------------------------------------
...
log-id 2
description "This is a test log file."
filter 1
from main security
to file 1
exit
...
----------------------------------------------
ALA-12>config>log>log-id#
The following displays an example to modify log file parameters:
Example: config# log
config>log# log-id 2
config>log>log-id# description "Chassis log file."
config>log>log-id# filter 2
config>log>log-id# from security
config>log>log-id# exit