SNMP
7450 ESS System Mangement Guide Page 317
access-group
Syntax access-group group-name
Context show>system>security
Description This command displays access-group information.
Output System Information Output — The following table describes the access-group output fields.
Sample Output
A:ALA-1# show system security access-group
===============================================================================
Access Groups
===============================================================================
group name security security read write notify
model level view view view
-------------------------------------------------------------------------------
snmp-ro snmpv1 none no-security no-security
snmp-ro snmpv2c none no-security no-security
snmp-rw snmpv1 none no-security no-security no-security
snmp-rw snmpv2c none no-security no-security no-security
snmp-rwa snmpv1 none iso iso iso
snmp-rwa snmpv2c none iso iso iso
snmp-trap snmpv1 none iso
snmp-trap snmpv2c none iso
-------------------------------------------------------------------------------
No. of Access Groups: 8
===============================================================================
A:ALA-1#
A:ALA-1# show system security access-group detail
Table 31: Show System Security Access-Group Output Fields
Label Description
Group name
The access group name.
Security model
The security model required to access the views configured in this
node.
Security level
Specifies the required authentication and privacy levels to access the
views configured in this node.
Read view
Specifies the view to read the MIB objects.
Write view
Specifies the view to configure the contents of the agent.
Notify view
Specifies the view to send a trap about MIB objects.
No. of access
groups
The total number of configured access groups.
To Next Page
Loading...
